[HOME] [PRODUCTS] [EXPERIENCE] [COMPANY PROFILE] [CONTACTS]

Products:

Products

Waveguide Rectangular

Waveguide Double Ridge

Waveguide Flexible
Waveguide Flexible- Twistable
Waveguide Circular
Waveguide to Coax Adapters
Couplers & Samplers
Attenuators
Magic Tees
Terminations
Pressure Windows
Millimeter Wave Products
Antennas
Filters
Power Combiners/ Dividers
Couplers Directional & Hybrids
Coaxial Connectors  & Transitions
Arrays & Feed Networks
High Power & Custom Products

new.gif (706 bytes)BAND PASS FILTER(J70B-529)

J70B-529bw.jpg (8618 bytes)

  • LOW LOSS
  • HIGH REJECTION
  • RUGGED CONSTRUCTION

MEC model J70B-529 is a WR137 Band Pass Filter with finite transmission zeros. It covers one of the communication tri-bands commonly used for satellite up-link and down-link communications.

This design features copper construction which helps to minimize losses – the insertion loss is just 0.5 dB. Flanges are aluminum to avoid incompatibility of dissimilar metals in an aluminum waveguide system installation. The filter has external aluminum support brackets to aid mechanical rigidity. There are two reject bands with ultra sharp rejection skirts and high attenuation. Two notch filters are used to achieve out of band rejection of 100 dB @ Fc+2%.

SPECIFICATIONS:

Model Number J70B-529
Pass Band Frequency 7.25-7.75 GHz
VSWR 1.2:1 Max
Insertion Loss 0.50 dB Max 7.30 - 7.75 GHz
0.54 dB Max 7.25 - 7.30 GHz
Amplitude ripple ± 0.10 dB over any 40 MHz
segment in the frequency range
Non linearity ± 3° over any 30 MHz segment
± 4° over any 40 MHz segment
Stop Bands <7.1 GHz & 7.9 to 9.6 GHz
Attenuation 100 dB Min at £ 7.10 GHz and 7.90-9.60 GHz
Power 6 KW Pk, 360 W Ave
Input/Output Ports WR137

(Data Sheet T-155) Data subject to change without notice


[New products]

  Updated  09/16/02